5G Router WG1608

£355.00

Main features of the product

  • Adopt MT7621A project, MIPS dual-core CPU, the main frequency is up to 880MHZ
  • 4G rate up to 300Mbps, 5.8G rate up to 867Mbps, 5.8G supports MU-MIMO
  • Using high-speed 256MB DDR3 with 16MB Nor Flash
  • 1WAN, 4LAN all 1000M adaptive network ports, support automatic flip (Auto MDI/MDIX)
  • Support TF card storage interface, can be used to expand SMABA or FTP network storage function
  • Support “One-key flash mode”, that is, long press the reset button to enter the rescue flash mode
  • Built-in M.2 standard interface, can be used to connect 5G mobile communication module
  • External standard SIM card interface, support SIM/USIM card
  • External high gain omnidirectional antenna, wireless signal 360 degrees without dead angle
Category:

Description

Hardware interface introduction
1*WAN port,1000Mbps supports auto flip (Auto MDI/MDIX)
EthernetCompliant with IEEE 802.3/802.3u/802.ab
Port4*LAN port,1000Mbps support auto flip (Auto MDI/MDIX)
Compliant with IEEE 802.3/802.3u/802.ab
TFcardTF card slot
Interface
SIMcard1*sim card slot, support SIM/USIM
Interface
PowerDC5.0*2.1MM interface
Interface
Button1*reset
Antennas2* omnidirectional 5dbi 2.4G and 5.8G antennas
4*omnidirectional 5dbi 5G mobile communication antennas,
1*GPS antenna
M.2Built-in M.2 slot, support PCIE and USB3.0 bus
Indicator function introduction
WANLEDConnect to the Internet port always bright, flashes when
have data communication
LAN1LEDConnect to the Internet port always bright, flashes when
have data communication
LAN2LEDConnect to the Internet port always bright, flashes when
have data communication
LAN3LEDConnect to the Internet port always bright, flashes when
have data communication
LAN4LEDConnect to the Internet port always bright, flashes when
have data communication
Adapter LEDAlways bright when power on, No light when the power
supply is faulty or not connected
Open 2.4G WIFI function is always bright, flashes when
2.4G WIFI LEDthere is data communication；when not open 2.4G WIFI
or 2.4G WIFI function fails, Not bright
Open 5.8G WIFI function is always bright, flashes when
5.8G WIFI LEDthere is data communication；when not open 5.8G WIFI
or 5.8G WIFI function fails, Not bright
When the routing system recognizes and successfully
mounts  the  5G  mobile  communication  module,  it  is
Move 5G LEDalways  bright.  When  the  5G  mobile  communication
module  is  faulty  or  does  not  access  the  5G  mobile
communication module, it does not light.
The  device  dials  successfully  through  5G  mobile
Internet LEDcommunication module or WAN port. It is always bright
when communication with the Internet is normal, and it is
off when the device cannot access the Internet